Flare x Copper Tube Compression Adapter Guide
The Flare x Copper Tube Compression Adapter is a versatile plumbing component that allows for secure and reliable connections in various plumbing projects. It is designed to join flare fittings and copper tubing, providing a leak-proof seal and ensuring the correct flow of liquids and gases. The following information will provide an introduction to the functions, specifications, and applications of the copper flare fittings.
Understanding Flare Fittings
Flare fittings are crucial components in plumbing systems which allow secure connections between pipes and tubing. These fittings feature a 45° flare on one end, that enables for any tight and reliable connection using the corresponding flare in the tubing. Flare fittings are widely used in a variety of applications because of their capability to resist vibration and mechanical pull-out.
One common type of flare fitting is the SAE 45° flare, which follows the specifications set from the Society of Automotive Engineers. These fittings possess a 45° flare angle and they are frequently used in automotive and hydraulic systems. They fulfill the functional requirements of SAE J512 and J513, ensuring their reliability and compatibility during these applications.
In addition to the SAE 45° flare, a different type of flare fitting will be the inverted flare. This fitting features a cone-shaped flare in the fitting end, providing a safe and secure connection with all the corresponding inverted flare in the tubing. Inverted flare fittings are an economical option and frequently used in automotive brake and fuel systems.
Benefits of Flare Fittings
Flare fittings offer several positive aspects that make them a well known choice in plumbing systems:
- Effectiveness against vibration: The 45° flare design of these fittings helps them withstand vibrations, ensuring the integrity of the connection even in dynamic environments.
- Mechanical pull-out resistance: Flare fittings provide a secure connection that resists pulling forces, preventing accidental disconnection.
- Wide range of applications: Flare fittings are versatile and can be utilized in various plumbing systems, including automotive, hydraulic, and gas applications.
- UL Listed: Many flare fittings are UL Listed, meaning they are tested and certified by Underwriters Laboratories, a trusted safety organization.
Samples of Flare Fittings
Below are a few samples of flare fittings:
| Fitting Type | Description |
|---|---|
| Straight Flare | A straight fitting with 45° flare angles on both ends, utilized for connecting two flare fittings or perhaps a flare fitting and tubing. |
| Union Flare | A fitting with two flare ends joined by a union, permitting easy disconnection and reconnection of pipes or tubing. |
| Elbow Flare | An angled fitting having a flare end, utilized for making 90° or 45° bends in plumbing systems. |
These are simply a few examples of the many kinds of flare fittings available, each created for specific applications and installation requirements.
In summary, flare fittings are crucial components in plumbing systems due to their secure connections, potential to deal with vibration, and wide variety of applications. Whether it’s the SAE 45° flare or perhaps the inverted flare, these fittings provide reliable and leak-free connections, making them an ideal choice in different plumbing projects.
Flare to Compression Adapter Options
The Flare x Copper Tube Compression Adapter offers an array of options to accommodate different plumbing needs. These options include:
- Flare to male NPT
- Flare to flare
- Flare to female NPT
- Flare to metric
One notable feature of these adapters is definitely the steel nut option, which provides additional strength and durability. This ensures a safe and secure and reliable connection, even in demanding plumbing applications.
Furthermore, some types of the Flare x Copper Tube Compression Adapter come with a Teflon seal around the valve core. This seal enhances the leak-proof capabilities of the adapter, providing you with reassurance and confidence in its performance.
It’s also worth mentioning these adapters are machined to ARI Standards, guaranteeing precision and quality within their construction. This ensures compatibility with industry standards and enables seamless integration with existing plumbing systems.
Lastly, the finger-tight quick seal cap is a vital feature from the Flare x Copper Tube Compression Adapter. This cap provides for simple and quick installation without resorting to additional tools. It ensures a tight and secure connection, further enhancing the reliability and performance from the adapter.
Flare to Compression Adapter Options
| Adapter Type | Features |
|---|---|
| Flare to male NPT | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
| Flare to flare | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
| Flare to female NPT | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
| Flare to metric | Steel nut option, Teflon seal, machined to ARI Standards, finger-tight quick seal cap |
To sum up, the Flare x Copper Tube Compression Adapter offers a number of options to cater to different plumbing requirements. With features such as the steel nut option, Teflon seal, and machined to ARI Standards, these adapters provide secure, durable, and high-performance connections. The finger-tight quick seal cap adds convenience to the installation process. Pick the Flare x Copper Tube Compression Adapter for reliable and leak-free plumbing connections.
Working Pressure Ranges and Temperature Ranges
The Flare x Copper Tube Compression Adapter provides reliable connections in plumbing projects, with working pressure ranges that vary based on the temperature and tubing size. It is vital to ensure that the temperature and tubing size are within the specified ranges to maintain the integrity of the connection. Is a review of the working pressure ranges at 73°F:
| Tubing Size | Working Pressure Range (PSI) |
|---|---|
| 1/8″ | 2800 |
| 1/4″ | 2000 |
| 3/8″ | 1800 |
| 1/2″ | 1600 |
| 5/8″ | 1400 |
| 3/4″ | 1200 |
| 7/8″ | 450 |
The Flare x Copper Tube Compression Adapter also provides a wide temperature variety of -65°F to 250°F, rendering it appropriate for various applications in plumbing projects.
Assembly Instructions for Flare Fittings
Proper assembly of flare fittings is essential to ensure a good and leak-proof connection. Follow these recommended assembly instructions to achieve optimal results:
-
Inspect the flare fitting and the tubing for virtually any indications of damage or imperfections.
-
Make certain that both the flare fitting and the tubing are neat and free from dirt, debris, or any foreign substances.
-
Employing a tubing cutter, cut the tubing for the desired length ensuring a neat and square cut.
-
Remove any burrs or sharp edges through the tubing utilizing a deburring tool or perhaps a file.
-
Slide the flare nut to the tubing, followed by the cone-shaped flare sleeve.
-
Carefully insert the tubing in to the fitting body until it reaches the base.
-
Tighten the flare nut with a flare nut wrench or a suitable wrench, ensuring to not overtighten.
-
Inspect the connection to ensure that the flare is correctly formed and the tubing is securely located in place.
-
Perform a leakage test by pressurizing the program and checking for any signs of leaks.
-
If no leaks are detected, the assembly is complete and prepared to use.
Following these assembly instructions will allow you to gain a reliable and sturdy connection together with your flare fittings.
| Step | Assembly Instructions for Flare Fittings |
|---|---|
| 1 | Inspect the flare fitting and the tubing for virtually any signs of damage or imperfections. |
| 2 | Make certain that both flare fitting as well as the tubing are neat and free from dirt, debris, or any foreign substances. |
| 3 | Employing a tubing cutter, cut the tubing to the desired length ensuring a neat and square cut. |
| 4 | Remove any burrs or sharp edges from the tubing utilizing a deburring tool or a file. |
| 5 | Slide the flare nut onto the tubing, followed by the cone-shaped flare sleeve. |
| 6 | Carefully insert the tubing in to the fitting body until it reaches the bottom. |
| 7 | Tighten the flare nut with a flare nut wrench or even a suitable wrench, making sure not to overtighten. |
| 8 | Inspect the connection to ensure that the flare is properly formed and also the tubing is securely located in place. |
| 9 | Carry out a leakage test by pressurizing the program and checking for just about any indications of leaks. |
| 10 | If no leaks are detected, the assembly is finished and prepared to be used. |
Sizing and Nomenclature of Flare Fittings
Flare fittings play an important role in plumbing projects, and understanding their sizing and nomenclature is important for choosing the proper fitting for your needs. Flare fittings are sized based on the amounts of sixteenths of your inch within the tube outer diameter (O.D.). Let’s break up the sizing and nomenclature to simplify your selection process.
Sizing
The very first series of numbers and letters within the part number identify the design and style and type from the flare fitting. The 2nd series of numbers represents the size and style, using sixteenths of the inch. For instance, a part number like 1 49 F – 6 – 4 indicates a forging style, a 3/8″ (6/16) tube O.D. size, as well as a 1/4″ (4/16) pipe size.
Nomenclature
The nomenclature of flare fittings helps to identify the particular characteristics and size of each fitting. Knowing the codes utilized in the part number ensures accurate selection and seamless ordering. Here’s a synopsis:
Nomenclature Description Style and kind Identifies the particular style and type of flare fitting Tube O.D. Size Represents the dimensions of the outer diameter from the tube, indicated in sixteenths of an inch Pipe Size Indicates the dimensions of the pipe in which the flare fitting is made, also measured in sixteenths of the inch
By familiarizing yourself using the sizing and nomenclature of flare fittings, you are able to confidently choose the right fitting for your plumbing project and ensure a good and reliable connection.
Advantages and Uses of Flare Fittings
Flare fittings are widely used in plumbing projects due to their numerous advantages and versatile applications. These fittings offer several positive aspects which make them a preferred selection for professionals in the market.
Advantages of Flare Fittings:
- Potential to deal with Mechanical Pull-Out: Flare fittings are created to resist mechanical pull-out, ensuring a secure and reliable connection. As a result them suitable for applications where vibration or movement may occur.
- Repeated Assembly and Disassembly: Flare fittings can be simply assembled and disassembled many times without compromising integrity. This flexibility provides for easy adjustments, repairs, or modifications without resorting to replacement.
- High-Quality Brass Materials: Flare fittings are manufactured from high-quality brass materials, guaranteeing durability and longevity. Brass is known for its corrosion resistance, making these fittings ideal for various plumbing applications.
Applications of Flare Fittings:
“Flare fittings are widely used in a range of plumbing applications, thanks to their reliability and leak-proof characteristics.”
Here are some common applications where flare fittings are widely employed:
- Flammable Liquid Applications: Flare fittings are listed with Underwriter’s Laboratories for flammable liquid applications, causing them to be a safe and secure and trusted option for projects involving the transportation or distribution of flammable substances.
- Marine Applications: Because of their resistance to mechanical pull-out and corrosion resistance, flare fittings are commonly used in marine plumbing systems, ensuring reliable connections in harsh saltwater environments.
- Refrigeration Applications: Flare fittings play an important role in refrigeration systems, providing leak-proof connections for refrigerant lines, ensuring optimal performance and efficiency.
- Gas Applications: Flare fittings will also be extensively used in gas plumbing systems, offering reliable and secure connections for that distribution of gases, including natural gas or propane.
- Hydraulic Tubing Applications: Flare fittings are compatible with use with some other materials, including copper, brass, aluminum, and welded steel hydraulic tubing. Their versatility enables them to be employed in diverse hydraulic systems.
- Hard-to-Hold Liquids and Gases: Flare fittings are specially designed for hard-to-hold liquids and gases, providing a trusted and leak-proof connection in challenging applications where containment is essential.
To summarize, flare fittings offer multiple advantages, including effectiveness against mechanical pull-out, ease of assembly and disassembly, and make use of of high-quality brass materials. These fittings find widespread applications in flammable liquid, marine, refrigeration, gas, hydraulic, and challenging liquid and gas plumbing systems. Their versatility, reliability, and leak-proof connections make sure they are an essential component for a variety of plumbing projects.
| Advantages | Applications |
|---|---|
| Effectiveness against mechanical pull-out | Flammable liquid applications |
| Repeated assembly and disassembly | Marine applications |
| Produced from high-quality brass materials | Refrigeration applications |
| Gas applications | |
| Hydraulic tubing applications | |
| Hard-to-hold liquids and gases |
Additional Options and Pricing
As well as the standard configurations, flare fittings offer an array of additional options to fulfill specific plumbing requirements. These options include:
- Bulkheads: Used for creating secure connections in confined spaces or through barriers.
- Auxiliary Fittings: Provide flexibility and adaptability in complex plumbing systems.
- Special Fittings: Customizable to satisfy unique project specifications.
- UL Stamped Fittings: Ensuring compliance with rigorous quality and safety standards.
When purchasing flare fittings, you should think about the pricing of non-stock items and consult the purchase price list supplied by the manufacturer. For special configurations, it is suggested to submit a print or sketch to inquire about pricing and availability. Please note that prices and availability are subject to change without prior notice, so you should monitor the newest information.
Flare Fittings Pricing Comparison
| Configuration | Pricing |
|---|---|
| Standard Flare Fitting | $5.99 |
| Bulkhead Flare Fitting | $8.99 |
| Auxiliary Flare Fitting | $6.99 |
| Special Flare Fitting | Custom Pricing |
Note: The pricing shown is made for illustrative purposes only and could vary based on the manufacturer and distributor.
Streamline ACR Press System
The Streamline ACR Press Method is revolutionizing the plumbing industry featuring its cutting-edge technology and innovative design. Engineered to provide superior performance and reliability, this system incorporates the latest advancements to provide exceptional brings about flare fittings.
The standout feature from the Streamline ACR Press Method is its Two Ring Advanced Press (T.R.A.P.) Technology. This groundbreaking technology ensures a stronger and more secure seal by creating 200% more surface contact involving the fitting and also the tubing. With T.R.A.P. Technology, you may have complete confidence in the integrity of the connections.
The DualSeal Ring Design of the ACR Press System further enhances its sealing capabilities. This design guarantees a solid and reliable seal, minimizing the chance of leaks and ensuring long-lasting performance. Additionally, the device includes the TrapZone Leak Barrier, an additional layer of protection which offers an added level of security against potential leaks.
In terms of joint compression and sealing performance, the Streamline ACR Press System delivers exceptional results. The Force360 Press Contour technology ensures a more uniform compression, promoting a trusted and tight seal every time. Furthermore, the Tri-Lock Press Profile enhances joint strength, making the system highly durable and resistant against any mechanical stress.
Compatibility is key in terms of plumbing systems, and also the Streamline ACR Press System excels in this area. It is compatible with R410A along with other frequently used refrigerant gases and oils, making it ideal for an array of applications. Whether you’re concentrating on commercial or residential projects, this system is made to meet your particular needs.
Being a proof of its quality and sturdiness, the Streamline ACR Press System features a 10-year limited warranty against defects in material and workmanship. This warranty offers peace of mind and helps to ensure that you’re buying a reliable and long-lasting solution to your plumbing needs.
To Conclude
The Flare x Copper Tube Compression Adapter is a vital component for secure and reliable connections in plumbing projects. Its versatile options, easy assembly instructions, and industry-leading innovations allow it to be the perfect choice for plumbers and contractors alike.
With the Flare x Copper Tube Compression Adapter, you are able to gain a leak-proof seal and make sure the correct flow of liquids and gases. If you are concentrating on commercial or residential plumbing projects, this adapter offers the durability and satisfaction necessary to complete the job right.
By including the Flare x Copper Tube Compression Adapter in your plumbing projects, you can have reassurance understanding that your connections are secure and reliable. Leave behind leaks and inefficient flow, and hello to a plumbing system that performs at its best.